Gastonia Roof Pros provides professional fascia & soffit in Gastonia, NC for residential and commercial properties across Gaston County and the western Charlotte metro. The aluminum wrap on your eaves is usually hiding something. Coil stock over rotted wood was the standard fix for thirty years, and on the older streets it is what we find on the majority of houses we open up.
The original detail was simple: exposed rafter tails, a 1x6 fascia, and on many plans no soffit at all. Boxed soffits came later, wrapped soffits later still, and each layer went over whatever was underneath rather than replacing it. Water that gets behind the metal has nowhere to dry, so the wrap accelerates the rot it was installed to hide.
We take the metal off before quoting. Sometimes the fascia is fine and the job is a day of trim and paint. Sometimes three rafter tails are gone back eight inches and there is a framing repair to do first. You cannot know from the ground and neither can anyone who quotes you from the driveway. So the quote comes in two parts: what we can see, and a rate for what we find.
Rot at the tail end gets cut back to sound wood and scarfed with a new piece, glued and screwed, not filled with epoxy and painted over. On a shallow eave the tail is doing real work holding the gutter and the fascia, and a cosmetic repair there fails again within a few winters. We photograph the open eave before anything closes it back up. Structural work at the eave is cheap now and expensive in five years.
For the replacement we use primed and back-primed wood on the houses where the eave is visible and part of the character, and we are happy to use PVC trim where it is not. The one thing we will not do is wrap raw wood in aluminum again, because that is how the last generation of these repairs turned into this generation's rot. What we find under the metal is rarely as bad as people fear.
If we are already there, this is the cheapest moment to solve intake ventilation. Cutting in vented soffit panel, or a slotted eave vent where no soffit exists, costs very little while the eave is open and it is expensive to come back for later. We will point that out even when you called us about a paint problem. Bundled while the eave is already open, intake venting is a fraction of its usual cost.
Our licensed and insured team brings the right materials and equipment to every job — rough-sawn 1x6 and 1x8 board decking, true-dimension 2x4 rafters at 24 inches on center, three-eighths plywood overlay across board sheathing, wood shingle lath buried under two layers of asphalt, abandoned central brick stove flues, slotted eave intake vents cut through the deck — and backs the work with a written workmanship warranty. We serve Gastonia and nearby communities including Belmont, Mount Holly, Bessemer City, Dallas.
What We Handle
Everything our fascia & soffit in Gastonia covers
One crew, one point of contact, and the full range of fascia & soffit work in Gastonia, NC. If it is on this list we do it in house rather than handing it to a subcontractor:
- fascia repair gastonia
- soffit replacement nc
- rotted fascia board
- aluminum wrapped fascia
- rafter tail repair
- vented soffit panel install
- eave repair old house
- wood fascia replacement gastonia
- soffit vent retrofit
- trim carpentry roofing
- eave rot repair gaston county
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Gastonia services.
Materials, equipment and how we do fascia & soffit
The difference between fascia & soffit that lasts and fascia & soffit that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with rough-sawn 1x6 and 1x8 board decking, true-dimension 2x4 rafters at 24 inches on center, three-eighths plywood overlay across board sheathing, wood shingle lath buried under two layers of asphalt, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Gastonia job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in Gaston County and the western Charlotte metro means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do fascia & soffit outside Gastonia
Gastonia Roof Pros covers Gastonia and the surrounding communities of Gaston County and the western Charlotte metro. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Fascia & Soffit in Belmont, NC — Gaston County, population 15,010
- Fascia & Soffit in Mount Holly, NC — Gaston County, population 17,703
- Fascia & Soffit in Bessemer City, NC — Gaston County, population 5,428
- Fascia & Soffit in Dallas, NC — Gaston County, population 5,927
- Fascia & Soffit in Lowell, NC — Gaston County, population 3,654
- Fascia & Soffit in Cramerton, NC — Gaston County, population 5,296
Start on the Gastonia Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Gastonia Chooses Gastonia Roof Pros
- ✓We date your roof by its building campaign, not by a guess. Layer count, board width, rafter dimension and flue condition, because on cohort-built housing those four readings predict the job.
- ✓A plane comes open before the price is final. On a board deck the fastener gaps and the soft board ends are the entire risk, and photographing them beats absorbing them later as a change order.
- ✓Decking is a separate line item with a per-board and a per-sheet rate written down, so a re-deck is a number you agreed to rather than a surprise delivered from the ladder.
- ✓We refuse work that the framing cannot carry. Tile on true-dimension rafters, coatings over shingles, and impact-rated upgrades on a roof already carrying two layers all get a no and a reason.
The standards behind fascia & soffit
Quality here is not a matter of opinion — it is written down. The fascia & soffit work we do in Gastonia follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every fascia & soffit project in Gastonia gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free fascia & soffit free estimate in Gastonia, or request a quote and we'll get right back to you.